Toboggan Assembly
Your toboggan comes in three pieces. The cord  is already attached. You will need some PVA (PVA 60)adhesive to attach the runners to the seat.		Squirt a small blob of glue into the dowel holes in the base of the seat.
Put a small amount of glue around the dowels on one of the runners.		Turn the runner over, locate the dowels in the holes and push the runner into place.
Repeat the same for the other runner ensuring that both runners are facing outwards and that the string is not trapped between the seat supports.		Once your toboggan is assembled, allow to dry as per adhesive manufacturers recommendations.

If you intend to use your toboggan in the snow you will need to lacquer or paint it.